Precision | Ontime | Consistent | Reliable
Nikon LK CMM and
MicroVu VMM, ensuring
every component meets
international aerospace
standards.
Turned on CNC lathes and turn-mills, and milled on our 3/4/5-axis machining centres. Stainless work-hardens if the tool rubs, so we run sharp, coated carbide with a steady feed and flood coolant. Critical faces and diameters are finished on surface and cylindrical grinders, then verified on our Carl Zeiss CMM.
Machined on 3/4/5-axis machining centres, CNC lathes and turn-mills. Titanium traps heat at the cutting edge, so we use low cutting speeds with higher feeds, sharp coated carbide, high-volume coolant and constant-engagement toolpaths. 5-axis access reduces setups on complex geometries, and every feature is checked on Carl Zeiss CMM and VMM.
Turned on CNC lathes and milled on our 3/4/5-axis machining centre with rigid workholding and high torque spindles. Inconel is abrasive and work-hardens quickly, so we run low speeds, cut below the hardened layer and monitor tool wear closely. Close-tolerance features are finished on cylindrical and surface grinders and inspected on Carl Zeiss CMM.
Machined on CNC lathes, turn-mills and 3/4/5-axis machining centres using positive-rake carbide at controlled speeds with generous coolant. Separate roughing and finishing passes manage heat, residual stress and distortion. Final sizes are achieved on cylindrical and fine grinders and verified on Carl Zeiss CMM.
Milled at high spindle speeds on our 3/4/5-axis machining centres and turned on CNC lathes, using polished carbide cutters that clear chips fast. Light, stable finishing passes hold thin walls and tight tolerances. Parts are deburred by vibro tumbling (if required) and inspected on Carl Zeiss CMM and VMM.
Precision-engineered for aerospace. Powered by advanced technology. Built on uncompromising quality and reliability.
Precision-engineered for aerospace. Powered by advanced technology. Built on uncompromising quality and reliability.
